工作原理: Working principle: 吸漿區:工作時浸沒在料漿的過濾板在毛細作用下結合真空壓力,表面吸附成一層濾餅,濾液通過濾板進分配閥至排液罐。 Suction area: During working, the filter plate immersed in the slurry is combined with vacuum pressure under the action of capillary, and the surface is adsorbed into a layer of filter cake. Finally the filtrate can pass through the filter plate into the distribution valve to the drop tank. 淋洗區:濾餅轉出料漿斗后,對濾餅進行噴淋洗滌。 Washing area: After the filter cake is transferred to the slurry hopper, the filter cake is sprayed and washed. 干燥區:濾餅繼續在高真空力的作用下脫水。 Dry area: The cake continues to dehydrate under the action of high vacuum force. 卸料區:進入無真空的情況下,刮刀自動卸料。 Discharge area: When there is no vacuum, the scraper automatically discharges the material. 反沖洗:工業水或?yàn)V液通過分配閥進入陶瓷板由內向外進行清洗。清洗堵塞的微孔。在陶瓷板使用一個周期后,采用超聲波配合低濃度酸混合清洗,保持陶瓷板的高效使用。 Backwash: In order to wash the blocked microwells, industrial water or filtrate get into the ceramic plate through the distribution valve, for washing from the inside out. After the ceramic plate is used for one cycle, the ultrasonic wave is used with low concentration acid mixing cleaning, to maintain the efficient use of ceramic plates. |
型號面積 |
濾盤/圈 |
濾板數量/塊 |
槽體容積/M3 |
裝機功率/KW |
運行功率/KW |
主機(L×W×H/)/M |
TC-1 |
1 |
12 |
0.21 |
3.5 |
2.0 |
1.6×1.4×1.5 |
TC-4 |
2 |
24 |
1.0 |
7.0 |
3.0 |
2.4×2.5×2.1 |
TC-6 |
2 |
24 |
1.2 |
7.0 |
6.0 |
2.4×2.9×2.5 |
TC-9 |
3 |
36 |
1.7 |
9.0 |
7.0 |
2.7×2.9×2.5 |
TC-12 |
4 |
48 |
2.2 |
11.0 |
7.5 |
3.0×2.9×2.5 |
TC-15 |
5 |
60 |
2.7 |
11.5 |
8.0 |
3.3×3.0×2.5 |
TC-21 |
7 |
84 |
4.0 |
13.5 |
9.0 |
4.6×3.0×2.6 |
TC24 |
8 |
96 |
4.5 |
16.5 |
10.5 |
4.9×3.0×2.6 |
TC-27 |
9 |
108 |
5.0 |
17.0 |
11.0 |
5.2×3.0×2.6 |
TC-30 |
10 |
120 |
5.5 |
17.5 |
11.5 |
5.5×3.0×2.6 |
TC-36 |
12 |
144 |
7.0 |
23.0 |
16.0 |
6.6×3.0×2.6 |
TC-45 |
15 |
180 |
8.5 |
25.0 |
19.0 |
7.5×3.0×2.6 |
TC-60 |
15 |
180 |
12.5 |
33.0 |
22.0 |
7.5×3.3×3.0 |
TC-80 |
20 |
240 |
16.2 |
40.0 |
24.0 |
9.0×3.3×3.0 |
TC-102 |
17 |
204 |
18.5 |
53.0 |
35.0 |
8.8×3.6×3.3 |
TC-120 |
20 |
240 |
20 |
60.0 |
40.0 |
9.7×3.6×3.3 |
TC-150 |
25 |
300 |
24 |
75.0 |
47.0 |
11.2×3.6×3.3 |
|
過濾板 Filter plate 1.骨架密度大、膜層強度高、耐磨耐壓耐腐蝕。 1. Large skeleton density, high film strength, wear resistance, pressure resistance and corrosion resistance. 選用電熔白剛玉經500T液壓機梯度成型、1430℃整體燒結,耐壓可達8bar。 Selection of electric fused white corundum by 500T hydraulic gradient molding, 1430℃ integral sintering, pressure can reach 8bar. 2.開孔率高、生產能力大;過濾精度高、真空能耗低。 2.High opening rate, large production capacity; High filtration accuracy, low vacuum energy consumption. 材質精細、整體復合,不使用膠粘結,透水性好、開孔率達92%;采用1800目超細白剛玉噴膜預涂層工藝,毛細作用好、真空能耗低。 The material is fine, the whole compound, not adopted adhesive bonding, good water permeability, opening rate of 92%; 1800 mesh ultra-fine white corundum spray film pre-coating process, good capillary action, low vacuum energy consumption. 3.再生方法多,使用壽命大大延長。 3. Various regeneration methods, the service life is greatly extended. 可使用高溫高壓、有機溶劑等清洗,再生效果好,使用壽命長。 It can be cleaned with high temperature and high pressure, organic solvent and etc., with good regeneration effect and long service life. |
控制系統 Control system 采用計算機控制系統或觸摸屏結合PLC控制,進料、過濾、清洗、配酸、均采用自動控制、攪拌、主軸減速機均采用變頻控制,可實現一人多機操作,自動化程度高、操作簡單方便、安全可靠。 Adopt computer control system or touch screen combined with PLC control. Feed, filter, cleaning, acid distribution are automatic control, mixing, the main shaft reducer adopts frequency control. It can achieve following effect: one person more machine operation, high degree of automation, simple and convenient operation, safe and reliable. |
氣水混合恒壓反沖洗系統 Gas-water mixed constant pressure backwash system 1)濾液再生系統采用精密過濾器過濾,環保節能。 1) The filtrate regeneration system adopts precision filter filtration, environmental protection and energy saving. 2)采用恒壓供水系統穩定清洗,安全可靠。 2) Constant pressure water supply system is used for stable cleaning, safe and reliable. 3)采用超聲波結合化學清洗劑聯合清洗陶瓷板,有力保證陶瓷板高效使用。 3) The use of ultrasonic combined with chemical cleaning agents to clean ceramic plates, effectively ensure the efficient use of ceramic plates. 4)自動配酸,減少勞動強度和危險性。 4) Automatically mix acid to reduce labor intensity and risk. |
礦種 mineral species |
粒徑分布 particle size distribution |
給料濃度 feed concentration % |
處理量KG/m2h processing capacity KG/㎡h |
濾餅水分% filter cake moisture % |
金精礦gold concentrate | -200~-325目 -200~-325mesh | 50~60 | 900~1500 | 6.5~11.5 |
金尾礦gold tailings | -200~-400目 -200~-400mesh | 45~60 | 400~600 | 13~16 |
銅精礦copper concentrate | -200~-325目 -200~-325mesh | 45~60 | 600~900 | 6.5~12 |
鐵精礦iron concentrate | -200~-325目 -200~-325mesh | 40~60 | 850~1500 | 6~10 |
鋅精礦zinc concentrate | -200~-325目 -200~-325mesh | 50~60 | 750~900 | 6.5~12 |
鉛精礦lead concentrate | -200~-400目 -200~-400mesh | 50~65 | 650~800 | 10~12 |
鋁土礦bauxite | -200~-325目 -200~-325mesh | 50~60 | 350~450 | 10.5~12 |
鉛鋅尾礦lead-zinc tailings | -200~-325目 -200~-325mesh | 50~65 | 350~550 | 12~16 |
氰化渣c(diǎn)yanide slag | -325~-450目-325~-450mesh | 50~60 | 350~550 | 21~24 |
硫精礦sulfur concentrate | -200目占80% | 50~65 | 350~790 | 8~12 |
鎳精礦nickel concentrate | -200~-325目 -200~-325mesh | 55~60 | 300~600 | 10~12 |
精煤cleaned coal | -200目占80% | 50~65 | 550~930 | 18~20 |
氧化鋅zinc oxide | -200目占75% | 55~65 | 620~1200 | 8~12 |
螢石粉fluorite powder | -200目占60% | 55~65 | 750~900 | 8~12 |
手機:13361303111
電話:0535-2132537
郵件:brxsb@yantaibairun.cn
地址:山東省煙臺市福山區福桃路2808號